1200
STAGE 3 HP
9.5s*
STAGE 3 1/4 MILE
1.9s*
0-60MPH
STAGE 3 CONTINUATION FIREHAWK
The Hawks Stage 3 Continuation Firehawk takes it up to 1200 HP and 1100 LB-FT of Torque with a Hawks Motorsports Supercharged LS7, tubular suspension components and double adjustable struts. Fitted with the best names in the aftermarket performance industry, the Stage 3 Continuation Firehawk is guaranteed to be the most extreme Firehawk ever built
BODY
The Hawks Stage 3 Continuation Cars can be built on a variety of different Firebird platforms. Choose between any 1991-1992 Firebird or Trans Am and your preference of body style and retro inspired color options and we take it from there.
No donor car needed.
Already have a nice low-mile donor car you'd like to convert? Reach out to us and we can go over the details.
INTERIOR
Gone are the days of loose steering and rattling panels. The interior of this Firebird has been completely gone through and is well sorted out. Upgrading to the Competition Package replaces both front seats with period correct Recaro's seats, Simpon 5-point harnesses, a Firehawk inspired roll bar and rear seat delete package.
CHASSIS
Starting with the best low-mileage examples available, we update the Stage 3 builds with custom valved double adjustable stuts/shocks and tubular suspension components. Equipped with a modern 10.0:1 steering box, the Continuation Firehawks drive just like a modern Firebird should.
WHEELS & BRAKES
EXHAUST
The exhaust is upgraded with our Hawks LS Conversion 2" Stainless Steel Headers, V-banded Y-pipe and our new 3.5 inch "Two Out The Left" stainless exhaust system.
No Firehawk is complete without those iconic Ronal R15 wheels. The Stage 3 builds recieve custom Forgeline 18 x 11inch front & 18 x 12 inch rear Billet Ronal Style Wheels with 315/30/R18 front tires & 335/30/R18 rear tires.
Inside them you will find standard 1LE 4-wheel disc brakes that can also be upgraded to Baer "6S XTR" calipers and 14 inch 2 piece rotors using our Competition Package.
ENGINE
The 7.0L LS7 has undergone the full Hawks Motorsports treatment receiving CNC ported cylinder heads and a custom ground Camshaft specific to the Continuation Series builds. The engine is fed by a Kong 2650 LSA Style Supercharger with custom Blower Lid exclusive to the Continuation Series.
The net result is : a 7500RPM redline, 1200 Horsepower and 1100 LB/FT of Torque.
TRANSMISSION
Backing that supercharged 427 is a "Z-R1" Spec Tremec T-56 "Magnum-F" 6-speed transmission. Inside, the Magnum-F benefits from the same durable components found in many of today's hardest hitting OEM muscle & sports cars. On top of this serious transmission is our Hawks Billet CNC Short Throw Shifter for a precise and firm shift every time.
REAR AXLE
At the back of this drivetrain package is a custom 8.8 Rear End assembly that is made in house at Hawks Motorsports. This rear axle housing features an OE ring and pinion, with little to no rear wheel loss, quiet gear operation and is one of the strongest rear end housings on the market.
SPECIFICATIONS
ENGINE:
Type
Hawks Motorsports Supercharged 427 w/Aftermarket Block
Bore & Stroke
4.125" x 4.00"
Displacement
427 cu in
Compression Ratio
10.0:1
HP, SAE Net
1200 @ 7,200 RPM
Torque, SAE Net
1100 @ 4,200RPM
Induction System
Kong 2650 LSA Supercharger
Exhaust System
Stainless Works 2 inch primary, 304 SS Headers w/3" Y-Pipe and Hawks Motorsports 3.5" "Two Out The Left" exhaust system
DRIVETRAIN:
Transmission
Z-R1 Spec Tremec T-56 Magnum F 6-Speed
2.29/1.61/1.21/1.00/0.81/0.67
Rear Axle
Hawks Motorsports Custom 8.8 Housing w/ 33 Spline Axles
Axle Ratio
3.55:1
CHASSIS:
Front Suspension
Independent, Custom Valved Viking Double Adjustable Struts and
Specific Coil Springs w/ Tubular K-Member and Lower Control Arms
Rear Suspension
Hawks 8.8 Solid Axle, Viking Double Adjustable Shocks and Specific Coil Springs w/ Tubular Lower Control Arms, Track Bar, Torque Arm and Stabilizer Bar
Steering
Specialty Turn One Steering Box w/10.0:1 Steering Ratio
Brakes
Standard 1LE Spec Power 4-Wheel Discs
Wheels
Custom Billet Forgeline 18 x 11" & 18 x 12" Ronal Style Wheels
Tires
315/30/R18 Front & 335/30/R18 Rear
GENERAL:
EXTERIOR:
Curb Weight
3400 Pounds
Fender Flares
3in Front, 4in Rear
Wheelbase
101 Inches
Retro Color Options
Dark Green Metallic
Fuel Capacity
15.4 Gallons
PERFORMANCE:
Bright White
Silver Blue Metallic
Power to Weight
0 to 60mph
Quarter-Mile
0.206 HP/LBS
1.9 Seconds
9.5 @ 150 MPH*
Medium Gray Metallic
Bright Red
Top Speed
Skidpad
223 MPH
.94g on Full Tread
200TW Tire
Brilliant Red Metallic
Bright Blue Metallic
*Specs shown reflect a "Drag Pack" equipped chassis
Black
Dark Aqua Metalic
Jamaica Yellow
